IanMacCormacModels

  I located some 1.5mm diameter magnets which are almost the size of the spring supports on Belgravia. So, in 7mm scale, at least, this allo...

 After the Spring meeting of the Brighton Circle at Patcham, I started to draw up some combinations of 3D printing with some etched parts. I...

 I have been fiddling around with many things to do with 7mm LB&SCR models and this is the latest. Not quite perfect but an etched chass...

 A first go at trialling this in 7mm scale. Looking promising but quite a bit still to do.

 Looking at all the separate parts, I thought I could incorporate the louvred screens into the end lockers so have done so, and drew up the ...

 Almost all the parts designed and printed and just placed on the underframe/floor units to double check sizes and quantities. A few more bi...

 This is a first go at the underframe in 4mm. Printed in two halves straight on the build plate. I have had to file off a load of the 'e...